Aller au contenu principal
Version: v3.6 (Non supportée)

Configuration

Configuration Steps​

  1. Initial setup: Configure the on-call schedule, tags, and communication ports on the primary station (designated as "Main station").

  2. Enable redundancy on both stations:

    • Go to Configuration > Options > Redundancy tab
    • Check Active with the station
    • Enter the computer name or IP address of the partner station

  3. Main station: Check the Main station checkbox on the primary unit only.

  4. Communication protocol: Select TCP/IP and modify the port number if necessary to avoid conflicts with other applications.

  5. Synchronization settings: Leave the following options unchecked initially:

    • Synchronization at launching
    • Synchronization on most recent configuration
    • Alarm synchronization (only needed when the supervisor runs on one station)

  6. Remote configuration of the redundant station: Use File > Open to enable remote configuration, then select Parameters, Supervision, and Groups & Teams.

  7. Define communication ports on the redundant station.

  8. Enable synchronization: Once redundancy is established, activate the previously unchecked synchronization options.

Expected Status​

Under normal conditions, all three LEDs should display green on both stations. Upon main station failure, the redundant station becomes active automatically.